01 / ENGINEERING NOTES
M5×0.8 and M5×0.5 are different interfaces
The current XTL-190(S/L)(M) PDF identifies 10-32 UNF imperial versions and M5×0.8 metric versions. Specify the actual suffix and port drawing. A replacement must match thread pitch, engagement and sealing location separately.
02 / ENGINEERING NOTES
Do not infer liquid compatibility from a metal package
The XTL-190 source explicitly says performance is not guaranteed in water and requests factory review of medium and O-ring compatibility. Record the actual gas/liquid and isolation need before considering an equivalent.
03 / ENGINEERING NOTES
Thin and water-cooled packages change the review
The LQ-062 original is a nominal 0.76 mm thin-line package. WCTV references are cooled assemblies with specific output, coolant and installation conditions. Exact WCT/WCTV/EWCTV identifiers are not interchangeable.
04 / ENGINEERING NOTES
A Wheatstone bridge needs its own electronics
Nominal bridge output, rated excitation, zero balance and compensated versus operating temperature are separate specifications. Confirm cable conductors, gain and both pressure-path responses when using a differential reference.
05 / ENGINEERING NOTES
Four acceptance dimensions before a written quotation
Use the source table below as a reference input. Send your full original suffix and port drawing, then define the acceptance limits.
- Pressure: reference, baseline, dynamic range and proof/survival limits.
- Mechanical: thread pitch, diaphragm location, seal shoulder/O-ring and cable routing.
- Thermal/media: operating versus compensated temperature, flash exposure and wetted compatibility.
- Electrical: output type, excitation, sensitivity, conductor/pinout and usable installed response.
ORIGINAL-MODEL DATA / INDEPENDENT REVIEW
Keep original specifications separate from a proposed replacement.
Facts below describe the named original models. A PPS configuration still needs its own dimensional, electrical and calibration evidence. Resonance and flat bandwidth are different quantities.
| Original model & source | Verified reference facts | Compatibility check | Review request |
|---|---|---|---|
| Kulite XCQ-062 | Four-arm bridge; 10 V excitation, nominal 100 mV full scale; range-dependent natural frequency. | Natural frequency without screen is range-dependent (150–1000 kHz); it is not a universal flat bandwidth. | Review this original ↘ |
| Kulite XTL-190(S/L)(M) | 10 V bridge; 10-32 UNF or M5×0.8 variants; −55 to +175 °C / −67 to +347 °F. | PDF explicitly says performance is not guaranteed in water; consult factory for medium/O-ring compatibility. M5×0.8 and M5×0.5 must be separate configurations. | Review this original ↘ |
| Kulite LQ-062 | 0.030 in / 0.76 mm nominal thin package; bridge; LQ temperature −55 to +120 °C. | LQ and LE temperature ratings differ; do not apply the LE limit to LQ. Screenless natural frequency is range-dependent; no flat DC–150 kHz guarantee. | Review this original ↘ |
| Kulite WCTV-312(M) | Cooled silicon bridge; nominal 100 mV full scale. Cooling conditions and exact suffix required. | Use exact WCTV versus WCT/EWCTV naming. Gas/media temperature, internal sensor temperature and cooling conditions are different. Do not copy 1093°C as the silicon-chip operating temperature. | Review this original ↘ |
No affiliation or universal interchangeability is implied. Pressure-port threads and electrical connector threads must be checked separately.
Pressure-chain questions for this configuration
Is this a guaranteed drop-in equivalent?
Compatibility is confirmed only after the complete original variant, port drawing, electrical interface and proposed-unit evidence have been reviewed.
What should I attach first?
The original datasheet, port or installation drawing, and required range/response/temperature are the most useful starting documents.
Sources and scope of the comparison
Original-model facts and general methods describe their named sources. They do not qualify a PPS unit or imply manufacturer affiliation.